Overview

Note: McGill AirClean makes the following Tech Tools information, data, and formulas available for your convenience and free use. Much of it is from the public domain, but some may be applicable only to McGill's specific, proprietary products. McGill makes no assurances or warranties, and assumes no liability for your use of its Tech Tools. Please contact techservice@mcgillairclean.com with your questions.

Determine what size fan or blower is needed for a specific process.
Results:
Actual Gas Flow:   0 ACFM at 0° F
Actual Design Flow:   0 ACFM at 0° F
Design Static Pressure:   0 in wg
Fan BHP:   0 bhp
Motor HP:   0 hp
Wet Gas Density:   0 lb/ft3 at 0° F
Density Factor:   0 at 0° F
Standard Static Pressure:   0 in wg
Results:
% Volume (H2O):   0
Saturation Pressure:   0
Value must be greater than 0.
Results:

% Volume (H2O): 0

Results:

Gas Flow Rate:   0

Results:

Pollutant Concentration:   0 gr/dscf

Results:
Atmospheric Pressure:   0 in Hg
Atmospheric Pressure:   0 psia
Estimate what size duct is needed.
Results:
Duct Diameter: 0 inches or 0 feet
Duct Cross Sectional Area: 0 sq.in. or 0 sq.ft.
Gas Flow: 0 ACFM
Convert general units of measure to English or metric.
Convert commonly used units of measure used with air pollution control systems to English or metric.
Results:
Flow Rate - Actual
ACFM
Am³/hr
Flow Rate - Standard to Normal
SCFM
Nm³/hr
Flow Rate - Dry
SCFMd
Nm³/hr (d)
Flow Rate - Wet
SCFMw
Nm³/hr (w)
Flow Rate
cfm
Am³/hr
Particulate Concentration
gr/dscf
mg/Nm³
Temperature
°F
°C
Temperature
°F
K
Temperature
°C
K
Velocity (per second)
ft/s
m/s
Velocity (per minute)
ft/min
m/min
Velocity (per hour)
mph
km/hr
Pressure
in wg
mm Hg
Pressure
in wg
psia
Pressure
psi
bars
Pressure
lb/ft²
bars
Mass Emission Rate
lb/hr
kg/s
Density
lb/ft³
kg/m³
Process Heat Input
BTU/hr
kW
FF Bag Weight
oz/yd²
kg/m²
FF Bag Permeability
cfm/ft²
Am³/hr/m²
Pump Capacity
gpm
m³/hr
Pump Total Dynamic Head
ft tdh
m tdh
Thickness
gauge
mm
Weight
lb
kg